Order Desk (610) 906-3549
High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines , Equipment and Personnel
Follow us on Twitter for new product announcements
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Fabrics > Fabrics - Heat Reflecting

Aluminized PET Film Coated Fiberglass Radiant Heat Reflective Fabric - High Temperature Heat Resistant


400°F / 204°C Continuous Exposure: Higher Intermittent

AluMaxTM high temperature, heat resistant poly-layered aluminized PET coated fabric reflects radiant heat and is the perfect protection for covering equipment that is in close proximity to intense radiant sources such as super-hot metal slabs, liquid and molten metals or glass, open flame/plasma or engine exhaust manifolds.  Excellent long term flexibility for use in garments, with or without liner materials.

This heat reflective fabric reflects 95% or more of the radiant heat that contacts its surface.  Constructed from a high-temperature base filament or texturized fiberglass fabric.

The base fabric will withstand continuous operation at 400°F / 204°C, this fabric will withstand short duration exposure up to 1115°F / 600°C and up to 3000°F / 1650°C for very short durations.  .

Available in the following base fabric weights:

                 Filament woven substrate: 8, 11, 15, 27 oz/sq/yd

                 Textrized woven substrate: 12.5, 22 and 26 oz/sq/yd.

This fabric is also available with a self-adhesive backing.  The adhesive is acrylic based, and will burn-off or vaporize at temperatures above 400°F.  If prolonged use of the self-adhesive fabric above 400°F is desired, then alternate securing methods such as fasteners, wire or clamps should be used.  Personnel should avoid inhaling fumes from the PSA.

AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Web by Archer-Technology.com
Back to content